Software-Defined Storage -- Why choose QStora?

QStora is a software-defined storage controller, which provides a high-performance virtual storage array in the form of virtual targets and logical volumes through standard Internet Small Computer System Interface (iSCSI) protocol.

The traditional hardware storage array provides low latency and high availability for each logical volume, but has problems of poor horizontal scalability, high cost, and may form many "isolated data islands". That leads to high cost and low utilization of storage resource. Some traditional distributed storage looks quite attracting, but usually has the problems such as complex deployment, bad performance and poor stability.

QStora delivers storage array in a quite different approach.

QStora is a zip package, which can be easily installed on the Linux operating system of any brand and any configuration of physical servers, bare metal servers, virtual machines and even container instances. QStora is completely decoupled with hardware drivers, so users can freely use the latest hardware on the market. Less vendor lock-in!

QStora is green. QStora runs as a group of user-mode processes, does not rely on any specific version of Linux kernel or distribution, does not rely on, or modify the operating system environment, does not monopolize the entire hard drive, and does not interfere with the execution of any other processes. Thus, QStora can run in the same Linux operating system instance concurrently with other applications. We call this feature "green". On the one hand, it can help users improve the utilization of existing hardware resource, on the other hand, it also lowers the barriers for potential users to try QStora - even a virtual machine is not needed!

QStora supports heterogeneous hardware. QStora allows each Linux operating system instance in the cluster to have different hardware configurations, such as different numbers of CPUs, different sizes of memory, different capacities of local hard drives, etc. QStora always does its best to provide the best performance. It can help users further improve the utilization of existing hardware resource.

QStora is high-performance. QStora adopts distributed dual-controller architecture to provide the low latency and high availability just like traditional hardware storage array, as well as high scalability and high throughput just like traditional distributed storage. It can scale from the 3 servers to thousands of servers immediately and shrink from thousands of servers to 3 servers one by one without service unavailability.

QStora is high-quality. QStora is designed to guarantee the data durability of each logical volume as long as the number of simultaneous disk faults in the cluster is not greater than the allowed fault number of logical volume's redundancy mode (for 3-replica mode, the allowed fault number is 2; for Erasure Code N+M mode, the allowed fault number is M). QStora is also designed to guarantee the service availability when any single server, link or disk fault occurs in the cluster. QStora has been sufficiently tested in complex and large-scale environments before release.

In summary, not only can QStora offer low latency and high availability just like traditional hardware storage array, but also high scalability and high throughput just like traditional distributed storage. The feature of green will help users largely reduce the cost of deployment and the feature of heterogeneous hardware support greatly improves the utilization of existing hardware resource.


Comments

Post a Comment

Popular posts from this blog

Introduction to the basic architecture and operation of Internet Small Computer Systems Interface

Image
 iSCSI is an acronym for Internet Small Computer Systems Interface, an Internet Protocol (IP)-based storage networking standard for linking data storage facilities. iSCSI works on top of the Transport Control Protocol (TCP), and provides block-level access between the iSCSI initiator and the storage target by carrying SCSI commands over a TCP/IP network. iSCSI is used to facilitate data transfers over intranets and to manage storage over long distances. iSCSI can be used to transmit data over local area networks (LANs), wide area networks (WANs), or the Internet, and can  enable  location-independent data storage and retrieval. Overview of the overall architecture iSCSI   is a remote mapping technology that maps a storage device on a remote server to the local area and presents it as a block device (which can be thought of as a disk). From the perspective of the normal user, the mapped disk is no different from the locally connected disk. This mapping is based on the SCSI protocol, whi
Read more

What is MPIO and how to use it?

M PIO is an acronym for MultiPath Input Output. This is a framework designed to configure load balancing and failover processes by providing multiple logical paths between storage devices and the server. The logical paths can be created through redundant physical components like buses, controllers, switches or bridge devices. Should one or more controllers, ports or switches fail, the server can route the I/O through an alternate path, the remaining controller, port or switch transparently and with no changes visible to the applications, other than perhaps resulting in increased latency.   Microsoft provides Device Specific Module (DSM) in Server 2008, 2012 and 2016, supports Asymmetric Logical Unit Access (ALUA), and can configure Multipath I/O (MPIO) environment with the storage device conforming to the SCSI Primary Commands (SPC) specification. DSM provides the load balancing policies, and load balance policies are generally dependent on the ALUA of the storage array attached to Win
Read more

Why is QStora a software-defined storage controller

Storage controller  is a device that manages the physical  disk drives  and presents them to the computer as  logical units .  It is also called "storage processor" or "array controller". Storage controller integrates the storage space in multiple storage devices and provides them as a single storage space to the client. When receiving a write data request from the client, the storage controller decides which of the multiple storage devices to allocate the data to, and stores the data in the selected one. When receiving a read request from the client, the storage controller finds the location where the data is stored, reads the data from the storage device and transmits it to the client. The storage controller performs these tasks in an efficient and stable manner. In addition to reading and writing data, the storage controller also implements various value-added functions, including dynamic allocation of volume capacity, snapshots, and so on. QStora is a software-d
Read more